Scroll through any Gunpla forum, 3D printing subreddit, or miniature painting Discord, and you’ll find the same complaint surfacing like clockwork: detail sanding is the worst part of the hobby. Rotary tools spin too aggressively and melt plastic. Orbital sanders are physically too large to reach the spots that matter. And hand sanding with tiny strips of sandpaper taped to popsicle sticks or wrapped around toothpicks? It works, technically, in the same way that crossing an ocean in a rowboat technically works. Makers have been hacking together solutions for this problem forever, modifying dental picks, repurposing nail files, spending hours on finishing work that should take minutes. The tooling industry, meanwhile, has mostly responded by miniaturizing existing designs and hoping for the best. Smaller orbital. Smaller rotary. Same fundamental problems, just in a tinier package.
HOZO’s NeoSander takes a different route entirely. Rather than shrinking down a tool that was never meant for fine detail work, HOZO went back to the core question of what precision sanding actually requires and built around the answer. The result is a palm-sized, cordless reciprocating sander powered by a patented linear motor that delivers 13,000 strokes per minute of direct, gear-free motion, paired with a system of 8 swappable head shapes and 8 sandpaper grits that covers everything from rough shaping to mirror-smooth finishing. It’s the kind of purpose-built approach that makes you wonder why it took this long for someone to try it.
Designer: HOZO
Click Here to Buy Now: $69 $99 ($30 off). Hurry, only 291/2000 left! Raised over $2.2 million.
HOZO moves away from the traditional drivetrain; NeoSander’s vertically mounted reciprocating linear motor sends power straight to the tip with zero intermediary conversion from rotational to linear energy. That directness pays off in concentricity under 0.05mm, which in plain terms means the sanding head tracks true instead of wobbling like a bobblehead at speed. Competing sanders sit at 0.30mm or worse, and that difference is the gap between sanding where you intend and accidentally eating into a surface you just spent two hours painting.
The NeoSander holds a constant 13,000 SPM and lets you dial the stroke length between 0.6mm and 1.8mm, rather than using variable RPM that changes the tool’s rhythm and makes behavior harder to predict. Shorter strokes for delicate edges on resin prints, longer strokes when you’re leveling a seam line on a 1/100 scale kit. That translates to a linear speed range of 260 to 780 mm/s, giving you meaningful control over aggressiveness without the tool ever feeling inconsistent under your fingers. A counterweight inside the body moves opposite to the sanding head too, canceling out 85% of handle vibration, which matters enormously during the kind of 30-minute sanding sessions that detail work demands.
Eight sanding head shapes cover pointed tips for crevices, slim and wide flats for panel lines and broad surfaces, half-cylinders and arcs for curved geometry, and acute and right-angle heads for corners and recesses. Pair those with eight grits from coarse 180 all the way to 1500 for polishing, and you have up to 74 possible combinations when you factor in the optional foam-backed sandpapers that conform to irregular surfaces. A color-coded rack keeps everything sorted by grit so you’re not playing guessing games mid-session. HOZO also threw in two saw blades, a curved blade for rough cuts and a jigsaw blade for through-cuts, because the same reciprocating motion that sands also drives a 0.2mm micro-tooth saw with a patented anti-binding pattern.
The whole thing weighs 89 grams (3.13 oz) without a head attached, measures 104 x 53 x 28mm, and runs on a 3.7V 1,100 mAh battery that delivers 45 minutes of heavy use or up to 240 minutes of lighter work. The aluminum alloy and magnesium shell carries an IP54 splash rating, so wet sanding is on the table. Dock charging takes 30 minutes to full, and USB-C keeps things universal. HOZO has shipped eight successful products through Kickstarter before this, including the NeoBlade ultrasonic cutter, and they’ve built out companion tools like the NeoBlock for flat-surface sanding that pair with the NeoSander for a complete finishing workflow.
The NeoSander Pro starts at $69 (against a $99 MSRP) and includes the sander, a basic sanding head set, sandpaper kit, and a carrying case. The Premium Combo, priced at $129, comes with multicolor-coded heads, a saw collection, and a charging dock. For the deep-end makers, the $499 Maker Pro All-In Combo bundles the NeoSander, NeoBlock, and NeoBlade with their full accessory suites at 39% off retail. The campaign runs on Kickstarter with an estimated shipping date of May 2026.
Click Here to Buy Now: $69 $99 ($30 off). Hurry, only 291/2000 left! Raised over $2.2 million.
