Comments on: Bottle Topping Biking Clipping

By: بزرگترين پرتال ايرانيان » Blog Archive » نگهدارنده بطری بر روی دوچرخه

بزرگترين پرتال ايرانيان » Blog Archive » نگهدارنده بطری بر روی دوچرخه — Fri, 09 Oct 2009 16:38:33 +0000

[...] این وسیله کوچک و ارزان قیمت می توانید به راحتی بطری آب و یا دیگر بطری [...]

By: Gianluca Gimini

Gianluca Gimini — Mon, 31 Aug 2009 07:26:09 +0000

1- one bottle cap does not fit all bottles so it looks very likely you might be pouring your favorite drink into a different bottle before you can carry it…
2- also the clip risks not fitting all bike frames
3- i can’t drink while biking: unclipping + unscrewing makes it too complicated and dangerous.

summing this up to what has already been said leads me to conclude it is a very unpractical device for biking. Never the less this is a very interesting innovation in packaging i think. Could draw attention on new beverage

By: Şişe Tutucu | Teknoloji ve Tasarım Harikaları

Şişe Tutucu | Teknoloji ve Tasarım Harikaları — Thu, 23 Jul 2009 20:26:06 +0000

[...] basit görünsede aslında şimdiye kadar hiç düşünülmemiş olması. İşte bunlardan biride Şişe Tutucu adını verdiğimiz bu icat. Bisiklet kullanırken bişeyler taşımak ne kadar güçtür herkes [...]

By: نگهدارنده بطری بر روی دوچرخه

نگهدارنده بطری بر روی دوچرخه — Wed, 22 Jul 2009 11:58:37 +0000

[...] این وسیله کوچک و ارزان قیمت می توانید به راحتی بطری آب و یا دیگر بطری [...]

By: Juan

Juan — Tue, 21 Jul 2009 17:46:20 +0000

I ride my bike every day, 10 miles at least, mon-fri, and sometimes drink water while riding and this is just stupid. Who wants bruises in the legs or a bottle between calves and hamstrings? Who wants to thread/un-thread a bottle while riding in the middle of the traffic? How many different clips should be done for ALL the different top tube sizes/shapes (mine’s a triangle shaped, 1 3/4″ thick)? This thing will never work.

By: Není zátka jako zátka - Gadgets blog - Vychytávky, USB hračky a originální dárky

Není zátka jako zátka - Gadgets blog - Vychytávky, USB hračky a originální dárky — Sun, 19 Jul 2009 16:05:32 +0000

[...] je její používání stejně bezpečné a rychlé jako u běžného držáku lahví. Zdroj: yankodesign.com Pokud se vám článek líbil, zazáložkujte jej prosím: badge = ”; document.writeln(badge); [...]

By: dennis

dennis — Fri, 17 Jul 2009 15:56:16 +0000

I think it’s a solution looking for a problem. Side to side flop? Neat, small package. And just because someone can cash in, doesn’t mean they should (asbestos anyone?). Good design? I don’t think so… Neat concept? Definitely. I wonder how many end user studies were performed before going to tool.

By: PK

PK — Fri, 17 Jul 2009 15:25:11 +0000

Also, there are many solutions for easy-to-install water bottle cages, here is but one example: http://www.sjscycles.co.uk/images/products/19clipon_l.jpg

By: PK

PK — Fri, 17 Jul 2009 15:23:29 +0000

Additionally, it takes A LOT more effort to get a drink, and dangerous/impossible to do while in motion.

Unscrewing a hanging bottle, trying not to spill, then screwing back in; versus grabbing, squeezing into mouth, and replacing a standard bottle.

By: joe

joe — Thu, 16 Jul 2009 19:39:36 +0000

Am I missing something? Bottle holders aren’t very difficult to install. Any bike I’ve ever owned has two screws sitting there waiting to be unscrewed and tightened down onto a holder, which by the way, is built with two holes that just happen to correspond with the screws. Genius! This design doesn’t save any work and it looks awfully unbalanced and awkward.